‘ACA’ Commercial and Industrial Activated Carbon Filters
- ‘MID’ Industrial Multi-Media Water Filters
- ‘AGA’ Filter-AG® Commercial and Industrial Water Filters
- ‘MGA’ Commercial and Industrial Iron Filters
- ‘ACA’ Commercial and Industrial Activated Carbon Filters
- ‘ANA’ Commercial and Industrial Neutralization Water Filters
- Shelco Filter Cartridges and Housings
For support regarding any of our industrial water filters, products and services, please contact an Industrial Water Solutions Representative.
Hours: Monday thru Friday 9-5 EST
Tel: 800-820-9021
Email: info@industrialh2osolutions.com
Contact us for a Quote
Tel: 800-820-9021
Email: info@industrialh2osolutions.com
‘ACA’ Commercial and Industrial Activated Carbon Filters – Granular Activated Carbon (GAC) are designed for the reduction of tastes, odors, and dissolved organic material from municipal and industrial water supplies. The most common carbon filter application is the removal of free chlorine from water supplies as pre-treatment to other water treatment systems such as reverse osmosis. Inlet water to activated carbon systems should be relatively free of turbidity and iron for optimal performance. Numerous types of activated carbon are available for specialty filter applications.
How To Size Industrial Water Carbon Filters
In addition to service flow, the selection of an industrial water carbon filter system must take into account the available backwash flow rate. This is the most important function in the proper operation of a filter for industrial water purification. Periodically, the accumulated impurities (iron, sediment, etc.) must be removed (backwashed) from the filter. Backwash flow rates are always much higher than service flow rates and therefore limit the size of filter that can be installed. As a general rule in sizing filters, select the largest filter that can be backwashed with the flow rate available at the point of filter installation, then note the service flow rate for the filter selected. If it is not adequate for the flow to be treated, a twin or triple filter installed in parallel is required. A parallel installation will increase the service flow while permitting each filter to be backwashed separately with the existing water supply.
Industrial Water System Service for Your Filters and Industrial Water Purification Service
Contact us right now at info@industrialh2osolutions.com or 800-820-9021 to buy or learn more about industrial water filters and industrial water purification, or for rapid repair service in Indiana, the Midwest and throughout the U.S. for your industrial water systems. Industrial Water Solutions (IWS) services and sells a variety of industrial water systems including industrial water softeners, industrial reverse osmosis, industrial water UV systems, and other industrial water systems.